Product Specifications
|
Parameter |
Specification |
|
Common materials / temper |
6063-T5/T6, 6005-T5 (6061-T6 on request) |
|
Cross section |
Approx. 10 × 5 mm to 193 × 28 mm |
|
Wall thickness |
0.6–25 mm (precision parts typically 0.6–5 mm) |
|
Length |
6 m standard, precision cut to order |
|
Dimensional tolerance |
GB/T 5237.1-2017 high / ultra-high precision; assembly faces to EN 755-9 precision class |
Thin Walls, Close Fits, No Hand Fitting
Precision aluminum extrusion profiles are shaped sections with multi-cavity, thin-wall and assembly-face features, sized about 10 × 5 mm to 193 × 28 mm, wall thickness 0.6–25 mm (precision parts usually 0.6–5 mm). Dimensions stay consistent between batches, thin walls form cleanly, and surfaces come off the die smooth with little burr, so parts enter assembly without further deburring.
Tolerance Grades
Section dimensions follow GB/T 5237.1-2017 at high-precision or ultra-high precision grade, and assembly faces can reach EN 755-9 precision class. Standard alloys are 6063-T5/T6 and 6005-T5, with 6061-T6 available; 6063-T5 gives Rm ≥ 160 MPa and Rp0.2 ≥ 110 MPa, and 6063-T6 gives Rm ≥ 195 MPa and Rp0.2 ≥ 160 MPa. Standard length is 6 m, cut precisely to the customer's length.


Precision Instruments and Medical Parts
Precision instrument guide rails and brackets, automation fittings, medical device and electronic precision structures, optical equipment structures, and sensor and actuator housings. Where the drawing requires tighter fitting than catalog grade, the mating-face tolerance can be reduced to suit.
Tooling and Payment
Tooling runs from a drawing or sample, with size, tolerance and alloy set to the customer's special requirement; special functions and tolerances are discussed during development, and the factory offers design suggestions. Material intake, first-off, in-process and final release inspection are recorded for traceability, certificates and test reports are supplied, and third-party inspection is accepted. Export-grade packaging can be adapted. Custom products are paid 50% in advance, with the remaining 50% after acceptance and before shipment. Domestic custom delivery begins at 15–20 days.
Hot Tags: precision aluminum extrusion profiles, China precision aluminum extrusion profiles manufacturers, suppliers, factory, Aluminum Frame Extrusion Profiles, Aluminum Heat Sink Extrusion Profiles, Complex Cross Section Aluminum Profiles, Multi Cavity Aluminum Extrusion Profiles, Precision Aluminum Extrusion Profiles, Structural Aluminum Extrusion Profiles