Aluminum Heat Sink Extrusion Profiles

Send Inquiry
Aluminum Heat Sink Extrusion Profiles
Details
Aluminum heat sink extrusion profiles at Xiamen Xihong Aluminum Industry Co., Ltd. are finned sections that do two jobs: they move heat and they hold the assembly together. Because the part is a single extrusion, it can be a cooling component and a structural member in the same piece, cutting part count in a design that would otherwise need a separate bracket. Sections run from about 30.8 × 28.55 mm to 315.6 × 27.8 mm, including 50 × 11.5 and 93.04 × 66.04 mm.
Category
Complex Aluminum Extrusions
Share to
Description
 
Product Specifications

Parameter

Specification

Common materials / temper

6063-T5/T6 (high thermal conductivity), 6005-T5

Cross section

Approx. 30.8 × 28.55 mm to 315.6 × 27.8 mm; includes 50 × 11.5, 93.04 × 66.04 mm

Wall thickness

0.65–8.58 mm (fins down to 0.65 mm)

Supply length

Sawn to cooling length

Dimensional tolerance

GB/T 5237.1-2017 high-precision grade (fin height, fin pitch, flatness)

Cooling Surface That Also Carries Structure

Aluminum heat sink extrusion profiles at Xiamen Xihong Aluminum Industry Co., Ltd. are finned sections that do two jobs: they move heat and they hold the assembly together. Because the part is a single extrusion, it can be a cooling component and a structural member in the same piece, cutting part count in a design that would otherwise need a separate bracket. Sections run from about 30.8 × 28.55 mm to 315.6 × 27.8 mm, including 50 × 11.5 and 93.04 × 66.04 mm.

Fin Area and Secondary Machining

Fins present a large specific surface area, so cooling efficiency holds up at medium and high power. After extrusion, parts can be sawn, drilled and tapped so they mount directly to a board or chassis with fewer secondary operations. Wall thickness is 0.65–8.58 mm, fins down to 0.65 mm.

3-5
3-11

Alloy, Finish and Tolerance

6063-T5/T6 handles conductivity, with 6005-T5 available; conductivity is around 190–210 W/(m·K). For 6063-T5, Rm ≥ 160 MPa and Rp0.2 ≥ 110 MPa. Fin height, pitch and flatness follow GB/T 5237.1-2017 high-precision grade, and profiles are sawn to cooling length. Anodizing raises corrosion resistance and surface radiation in one step.

Where They Are Used

Power electronics cooling, LED cooling, inverters, VFDs, charging piles, power modules, motor controllers and communications equipment.

 

Tooling and Checks

Fin shape, fin count and base thickness are tooled to the thermal drawing; the factory reviews the device's cooling requirement and proposes fin and base geometry. Incoming material, first-off, in-process and final release inspection are recorded, certificates and test reports accompany shipments, and third-party inspection is accepted. Export-grade packing can be adapted; EXW and FOB are available. Domestic samples take 7–10 days.

 

Hot Tags: aluminum heat sink extrusion profiles, China aluminum heat sink extrusion profiles manufacturers, suppliers, factory, Aluminum Frame Extrusion Profiles, Aluminum Heat Sink Extrusion Profiles, complex aluminum extrusions, Multi Cavity Aluminum Extrusion Profiles, Precision Aluminum Extrusion Profiles, Structural Aluminum Extrusion Profiles

Send Inquiry