Solar Panel Holder Bracket

Send Inquiry
Solar Panel Holder Bracket
Details
Solar panel holder brackets at Xiamen Xihong Aluminum Industry Co., Ltd. are the profiles that span between supports and carry the modules: rails, cross beams and diagonal braces. Standard series are 40 × 40, 50 × 50 and 80 × 40 mm, wall thickness 1.5–3.0 mm, linear weight 0.5–3.5 kg/m. These sections sit above the main support structure and distribute module weight across the array.
Category
Solar Mounting Accessories
Share to
Description
 
Product Specifications

Parameter

Specification

Common materials / temper

6005-T5/T6, 6063-T5/T6 (high strength, light weight)

Cross section

Common series 40 × 40, 50 × 50, 80 × 40 mm

Wall thickness

1.5–3.0 mm (typical for bracket profiles)

Length

Cut to array span, any size within 6 m

Dimensional tolerance

GB/T 5237.1-2017 high-precision grade

The Rail and Beam Layer of an Array

Solar panel holder brackets at Xiamen Xihong Aluminum Industry Co., Ltd. are the profiles that span between supports and carry the modules: rails, cross beams and diagonal braces. Standard series are 40 × 40, 50 × 50 and 80 × 40 mm, wall thickness 1.5–3.0 mm, linear weight 0.5–3.5 kg/m. These sections sit above the main support structure and distribute module weight across the array.

Span and Self-Weight

High strength at low weight reduces the self-weight of the rail layer and the load it passes to the supports and foundations. Modular design allows quick on-site assembly, and clamps and fixtures match the rail so modules fix quickly without drilling. 6005-T5/T6 and 6063-T5/T6 are used; 6005-T5 gives Rm ≥ 250 MPa and Rp0.2 ≥ 220 MPa, and 6063-T6 gives Rm ≥ 195 MPa and Rp0.2 ≥ 160 MPa. Dimensions follow GB/T 5237.1-2017 high-precision grade. Lengths are made to the array span, any size within 6 m.

IMG20260911101741
IMG20260911101843

Where the Rails Go

Ground-mounted PV plant array rails, rooftop distributed PV bracket rails, PV carport cross beams, agrivoltaic bracket systems and BIPV building-integrated support structures. Finish is AA15 anodizing with average film ≥ 15 μm or powder coating 60–120 μm for outdoor corrosion resistance.

Sizing to Wind and Snow

Section, holes and connection structure are tooled to the project wind and snow load; the factory reviews array span and installation environment to advise on section and connection design. Material intake through final release inspection is recorded for traceability, with certificates and test reports provided and third-party inspection accepted. Export-grade packaging can be adapted. Domestic custom delivery starts at 15–20 days.

 

Hot Tags: solar panel holder bracket, China solar panel holder bracket manufacturers, suppliers, factory, Adjustable Angle Solar Panel Mounting Bracket, solar mounting accessories, Solar Panel Holder Bracket, Solar Panel Mounting Trays, Solar Panel Support Brackets, Solar Rail Mount Clamps

Send Inquiry