Industrial Heat Sink

Send Inquiry
Industrial Heat Sink
Details
Industrial heat sinks at Xiamen Xihong Aluminum Industry Co., Ltd. leave the plant as finished parts, not bars. Each is sawn to the module length, commonly 50–2000 mm, then drilled, tapped or slot-milled as the drawing requires, so it can be bolted onto the power module on arrival. The buyer skips a machining step and receives a part dimensioned to the mounting pattern. Sections span roughly 30.8 × 28.55 mm to 315.6 × 27.8 mm, and wall thickness is 0.65–8.58 mm.
Category
Heat Sinks
Share to
Description
 
Product Specifications

Parameter

Specification

Common materials / temper

6063-T5/T6 (high thermal conductivity), 6005-T5

Cross section

Approx. 30.8 × 28.55 mm to 315.6 × 27.8 mm

Wall thickness

0.65–8.58 mm (fins down to 0.65 mm)

Supply length

Sawn to module length, commonly 50–2000 mm

Thermal conductivity

Approx. 190–210 W/(m·K)

Sawn, Drilled and Tapped Before It Ships

Industrial heat sinks at Xiamen Xihong Aluminum Industry Co., Ltd. leave the plant as finished parts, not bars. Each is sawn to the module length, commonly 50–2000 mm, then drilled, tapped or slot-milled as the drawing requires, so it can be bolted onto the power module on arrival. The buyer skips a machining step and receives a part dimensioned to the mounting pattern. Sections span roughly 30.8 × 28.55 mm to 315.6 × 27.8 mm, and wall thickness is 0.65–8.58 mm.

Drive Cabinet and Charger Duty

These are the cooling parts inside production equipment: VFDs, servo drives, rectifiers, welding machines and charging piles. Tight fin spacing puts a large cooling area along each meter. Fins and base are one extrusion, so there is no contact resistance at the fin root and no joint that can fail in service.

3-2
3-3

Material and Measurement

6063-T5/T6 carries the heat, with 6005-T5 available. Conductivity is about 190–210 W/(m·K). 6063-T5 shows Rm ≥ 160 MPa and Rp0.2 ≥ 110 MPa. Fin height, pitch and flatness are held to GB/T 5237.1-2017 high-precision grade.

Post-Cut Operations and the Die

Which secondary operations are needed depends on how the heat sink mounts, so hole pattern, tap size and slot position are agreed before the die is cut. The factory reviews the module's heat load and the mounting interface together, then proposes fin geometry that fits both.

 

Checks and Shipping

Incoming material, first-off, in-process and final release inspection are recorded, with certificates and test reports supplied and third-party inspection accepted. Export-grade packing is standard and can be tailored. EXW and FOB terms are quoted. Domestic custom delivery begins at 15–20 days.

 

Hot Tags: industrial heat sink, China industrial heat sink manufacturers, suppliers, factory, Air Cooled Heat Sink, Automotive Heat Sink, Heat Pipe Heat Sink, heat sinks, Industrial Heat Sink, Natural Convection Heat Sink

Send Inquiry