Storage And Transportation Of Industrial Aluminum Profiles

Sep 04, 2026

Leave a message

Industrial aluminum profiles are typically 6 meters in length. Because aluminum alloys are less hard than steel-making them susceptible to dents or abrasions during production and transport-they are generally packaged before leaving the factory. There are various packaging methods, the most common being a combination of protective film and kraft paper. In this process, individual profiles are first wrapped in protective film to keep them separate; the ends are then secured with adhesive tape. The profiles are subsequently fed into a packaging machine, which applies an even layer of film over them, followed by an outer layer of kraft paper for added stability.

 

The soft, pliable protective film keeps the profiles separated, preventing them from rubbing against one another and sustaining surface marks. The thick, rigid kraft paper provides a robust shield against external impact.

 

For profiles with particularly stringent surface requirements-such as those used for solar panel frames-the surfaces are first coated (painted or finished) before undergoing the aforementioned packaging process.

 

For smaller quantities of industrial aluminum profiles, EPE foam (pearl cotton) or bubble wrap is used. Each profile is wrapped individually, with extra bubble wrap applied to the ends to prevent collisions or scratches during transit, loading, and unloading. For shorter, cut-to-size pieces, the profiles can be wrapped in EPE foam, placed onto pallets, secured with stretch wrap, and strapped down. This approach significantly reduces the risk of damage to the industrial aluminum profiles.

Send Inquiry