What are the specific requirements for the design of dies for custom-shaped aluminum profiles?

Oct 15, 2026

Leave a message

The design of dies for complex-shaped aluminum profiles requires special attention to the following aspects:

 

First, the structure of the porthole die (or bridge die) must be optimized. Given the complex cross-sections of such profiles, an asymmetrical porthole design is necessary to balance metal flow. Flow-control chambers should be incorporated to manage material distribution, and the lengths of the bearing surfaces (working bands) should be graded according to the complexity of the cross-section-typically, the bearing length in more complex areas should be increased by 20–30%.

 

Second, strength verification is essential. Finite element analysis (FEA) must be performed on the weaker sections of the die, with reinforcing ribs added at critical locations. The use of high-quality H13 tool steel is recommended, with hardness maintained within the HRC 46–48 range.

 

Third, the venting system must be carefully designed; dedicated air-venting channels should be provided, and the relief angle (clearance angle) of the bearing surfaces should be optimized to 1.5°–2° to ensure efficient gas evacuation. Regarding precision control, dimensional tolerances should be tightened by one grade beyond the GB/T 14846 standard, and a shrinkage allowance of 0.8%–1.2% should be factored in. For particularly complex profiles, a multi-stage composite die design is recommended. The thickness of the die core should be calculated based on the extrusion ratio and should generally be no less than 15 mm. A specialized guiding mechanism should be installed at the die exit to prevent the profile from deforming after it emerges.

 

Furthermore, the die surfaces must be polished, with the surface roughness (Ra) of the bearing areas required to be ≤ 0.4 μm to ensure the desired surface quality of the extruded profiles.

Send Inquiry