Product Specifications
|
Parameter |
Specification |
|
Common materials / tempers |
6063-T5/T6, 6005-T5 |
|
Cross section |
93.04 × 66.04, 50 × 11.5, 315.6 × 27.8, 96 × 28, 99 × 27.4, 59 × 16.85 mm and similar sizes |
|
Wall thickness |
0.65–8.58 mm |
|
Supply length |
Cut to the required device mounting length |
|
Dimensional tolerance |
GB/T 5237.1-2017 high-precision grade requirements for width, flatness and fin pitch |
Rectangular Base for Direct Mounting
The Rectangular Heat Sink from Xiamen Xihong Aluminum Industry Co., Ltd. features a rectangular cross-section for mounting on power modules and other electronic components. Common sizes include 93.04 × 66.04, 50 × 11.5, 315.6 × 27.8, 96 × 28, 99 × 27.4 and 59 × 16.85 mm. Wall thickness ranges from 0.65 to 8.58 mm. The fins and base plate are extruded as a single piece, eliminating the interface between separately assembled components and providing a direct path for heat transfer.
Thermal Performance and Material Grades
6063-T5/T6 is available for heat dissipation applications, with 6005-T5 as another material option. Thermal conductivity is approximately 190–210 W/(m·K). Typical mechanical properties of 6063-T5 include a tensile strength (Rm) of at least 160 MPa and a yield strength (Rp0.2) of at least 110 MPa. Width, flatness and fin pitch follow the GB/T 5237.1-2017 high-precision grade requirements. Profiles are cut to the required mounting length. Different section sizes can be selected to suit the cooling requirements of low-power and high-power modules.


Cooling for Modules and Controllers
These Rectangular Heat Sink profiles are used in power modules, rectifier modules, motor controllers, welding machines, servo drives, communications equipment and industrial control cabinets. Press-fit studs and tapped mounting holes can be added after extrusion, allowing the finished parts to be supplied ready for installation and reducing additional machining at the buyer's facility.
Customization and Ordering
Overall dimensions, fin geometry and mounting-hole positions can be customized according to technical drawings. The factory reviews the device mounting footprint and cooling requirements before recommending suitable fin configurations and hole layouts. The minimum order quantity is 300 kg per item. For orders below this quantity, a setup fee of USD 500 per item per production run applies, with the fee adjusted according to section size. Inspection records cover incoming materials, first-piece approval, in-process checks and final inspection. Material certificates and test reports are available, and third-party inspection is accepted. Export packaging can be adapted to shipping requirements. EXW and FOB terms are available.
Hot Tags: rectangular heat sink, China rectangular heat sink manufacturers, suppliers, factory, Air Cooled Heat Sink, Heat Pipe Heat Sink, heat sinks, Industrial Heat Sink, Natural Convection Heat Sink, Rectangular Heat Sink