Round Aluminum Extrusion Profiles

Send Inquiry
Round Aluminum Extrusion Profiles
Details
Round aluminum extrusion profiles are available as both hollow tubes and solid rods. Tube outside diameters range from approximately 10 to 48 mm, with examples including 10 × 5, 26.5 × 20.3 and 47.6 × 44.8 mm. Solid rod diameters range from approximately 4 to 32 mm, while tube wall thickness ranges from 1.0 to 12.5 mm. Roundness and wall thickness consistency are important for parts that rotate or fit into mating bores.
Category
Aluminum Profiles
Share to
Description
 
Product Specifications

Parameter

Specification

Common materials / temper

6063-T5/T6, 6061-T6 (6005-T5, 6082-T6 on request)

Tube OD

Approx. 10–48 mm

Solid rod diameter

Approx. 4–32 mm

Tube wall thickness

1.0–12.5 mm

Dimensional tolerance

GB/T 5237.1-2017 high-precision grade

Round Tubes and Solid Rods

Round aluminum extrusion profiles are available as both hollow tubes and solid rods. Tube outside diameters range from approximately 10 to 48 mm, with examples including 10 × 5, 26.5 × 20.3 and 47.6 × 44.8 mm. Solid rod diameters range from approximately 4 to 32 mm, while tube wall thickness ranges from 1.0 to 12.5 mm. Roundness and wall thickness consistency are important for parts that rotate or fit into mating bores.

Alloys and Secondary Processing

Standard alloys include 6063-T5/T6 and 6061-T6, with 6005-T5 and 6082-T6 available on request. Typical mechanical properties for 6063-T6 are a minimum tensile strength (Rm) of 195 MPa and a minimum 0.2% proof strength (Rp0.2) of 160 MPa. For 6061-T6, the corresponding minimum values are 260 MPa and 240 MPa. Outside diameter and wall thickness tolerances follow the high-precision grade specified in GB/T 5237.1-2017. Lengths of up to 6 m are available, with cutting to order. The profiles can be saw-cut, drilled or bent, and tube sections can also undergo bending or flaring where required. Anodizing and polishing are available for exposed surfaces where appearance is important.

IMG20260904150418
IMG20260904165206

Applications for Tubes and Rods

These round aluminum extrusion profiles are used for drive shaft sleeves, pneumatic and hydraulic components, handrail posts, clothes rails, furniture legs, antenna masts, lamp posts, flagpoles, conduit and structural supports. Tubes and solid rods can be supplied together in one order, allowing buyers to source both product types from the same supplier.

Custom Sizes and Ordering

Outside diameter, wall thickness and length can be specified to order. The factory reviews customer drawings or samples to assess machining feasibility and recommends suitable alloys and tolerances. Incoming material inspection, first-piece inspection, in-process checks and final inspection are recorded for traceability. Material certificates and test reports are provided, and third-party inspection is accepted. Export packaging can be adapted to customer requirements.


The minimum order quantity is 300 kg per item. Orders below this quantity incur a setup fee of USD 500 per item per production run, adjusted according to section size. Custom samples for domestic orders typically take 7–10 days.

 

Hot Tags: round aluminum extrusion profiles, China round aluminum extrusion profiles manufacturers, suppliers, factory, Aluminium Alloy Profile, aluminum profiles, Extruded Aluminum Enclosure Profiles, Heatsink Extrusion Profiles, Round Aluminum Extrusion Profiles, Slimline Aluminium Profile

Send Inquiry