Product Specifications
|
Parameter |
Specification |
|
Common materials / temper |
6063-T5/T6 (high conductivity), 6005-T5 |
|
Cross section |
Approx. 30.8 × 28.55 mm to 315.6 × 27.8 mm |
|
Wall thickness |
0.65–8.58 mm (fins down to 0.65 mm) |
|
Supply length |
6 m standard, sawn 20–6000 mm |
|
Thermal conductivity |
Approx. 190–210 W/(m·K) |
Fin Pattern Comes From the Thermal Drawing
At Xiamen Xihong Aluminum Industry Co., Ltd., heatsink extrusion profiles are not chosen from a fixed list of fin patterns. Fin height, fin count, pitch and base plate thickness follow the customer's thermal design, and the die is cut to match. Sections run from about 30.8 × 28.55 mm to 315.6 × 27.8 mm, with 50 × 11.5 and 93.04 × 66.04 mm among the reference sizes. The product is supplied as a profile: the buyer receives cut blanks and handles machining and assembly in their own shop.
One-Piece Fin and Base
Fins and base plate leave the press as a single body - no braze line, no solder joint, no gap at the fin root. The thermal path stays short and the joint cannot loosen under thermal cycling. Fins can be drawn down to 0.65 mm, which is where the surface area per meter comes from. Wall thickness spans 0.65–8.58 mm.


Numbers Buyers Ask For
6063-T5/T6 is the conductivity alloy, with 6005-T5 also supplied. Thermal conductivity sits around 190–210 W/(m·K). For 6063-T5, Rm ≥ 160 MPa and Rp0.2 ≥ 110 MPa. Fin height, pitch and thickness are held to GB/T 5237.1-2017 high-precision grade. Profiles ship in 6 m lengths and are sawn to the heatsink length, anywhere from 20 to 6000 mm.
Where These Sections End Up
IGBT and MOSFET modules, LED drivers and luminaires, base station equipment, inverters, VFDs, RF power amplifiers, charging piles and motor controllers. Before a die is cut, the factory checks section extrudability from the thermal drawing and recommends an alloy.
Inspection and Commercial Terms
Material intake, first-off, in-process patrol and final release are logged, with traceability through the run. Certificates and factory test reports are issued; third-party inspection is accepted. Export-grade packing can be adapted. Domestic samples take 7–10 days. Warranty is one year from acceptance, covering raw material and production defects. EXW and FOB are both quoted.
Hot Tags: heatsink extrusion profiles, China heatsink extrusion profiles manufacturers, suppliers, factory, aluminum profiles, Extruded Aluminum Enclosure Profiles, Heatsink Extrusion Profiles, Round Aluminum Extrusion Profiles, Slimline Aluminium Profile, Standard Extrusion Profiles