Product Specifications
|
Parameter |
Specification |
|
Common materials / tempers |
6063-T5/T6; 6005-T5 available on request |
|
Cross section |
Approximately 5 × 6 mm to 30 × 20 mm; circumscribed circle diameter generally ≤ 30 mm |
|
Wall thickness |
0.6–3.0 mm; measured values of 0.85–2.75 mm |
|
Length |
Up to 6 m, cut to order |
|
Dimensional tolerance |
GB/T 5237.1-2017 high-precision or ultra-high-precision grade |
Compact Sections with Lower Tooling Costs
Small Aluminium Extrusions from Xiamen Xihong Aluminum Industry Co., Ltd. are designed for miniature, non-standard sections with a circumscribed circle diameter generally no greater than 30 mm. Available cross sections range from approximately 5 × 6 mm to 30 × 20 mm, including C-shaped strips, D-shaped tubes and compact U-shaped profiles. Wall thickness ranges from 0.6–3.0 mm, with measured values of 0.85–2.75 mm. The compact die size helps keep tooling costs and lead times manageable, particularly during design validation when production volumes have not yet been finalized.
Consistent Wall Thickness and Dimensional Accuracy
The standard alloy is 6063-T5/T6, with 6005-T5 available on request. For 6063-T5 with wall thicknesses up to 3 mm, typical mechanical properties are Rm ≥ 175 MPa and Rp0.2 ≥ 130 MPa. The extrusion process helps maintain consistent wall thickness along the profile, supporting assembly of small precision components with less need for manual fitting. Cross-sectional dimensions and tolerances follow the high-precision or ultra-high-precision grades specified in GB/T 5237.1-2017. Lengths of up to 6 m can be cut to order. A range of surface treatments is available for both functional components and profiles with exposed surfaces.


For Compact Devices and Assemblies
Typical applications include electronic component brackets, sensor housings, connector structures, LED strip channels, decorative trim, model components, hardware parts, medical device fittings and internal guide slots for instruments. These applications often have limited installation space, making compact extruded sections suitable where a separate machined recess may otherwise be required.
Tooling, Sampling and Small-Batch Orders
Small Aluminium Extrusions can be developed from customer drawings or samples. Special functions, dimensional tolerances and alloy requirements are reviewed during tooling development. The minimum order quantity is 300 kg per item. Orders below this quantity incur a USD 500 setup fee per item per production run, adjusted according to section size. Free samples are available for samples weighing less than 2 kg; heavier samples are chargeable. Domestic sample development takes 7–10 days.
Quality checks include incoming material inspection, first-piece inspection, in-process checks and final inspection, with records maintained throughout production. Material certificates and test reports are provided, third-party inspection is accepted, and export packaging can be customized to buyer requirements.
Hot Tags: small aluminium extrusions, China small aluminium extrusions manufacturers, suppliers, factory, aluminum extrusions, Black Anodized Aluminum Extrusion, Curved Aluminium Extrusion, Precision Aluminum Extrusion, Small Aluminium Extrusions, T Track Aluminium Extrusion