Product Specifications
|
Parameter |
Specification |
|
Common materials / temper |
6063-T5/T6, 6005-T5/T6 (6061-T6, 6082-T6 on request) |
|
Cross section |
Multi-rib, multi-cavity, cantilever, sloped-wall sections; measured approx. 24 × 9 mm to 193 × 28 mm |
|
Wall thickness |
0.6–25 mm (ribs/teeth down to 0.6 mm) |
|
Length |
Up to 6 m, cut to order |
|
Dimensional tolerance |
GB/T 5237.1-2017 high-precision / ultra-high precision grade |
Geometry That Standard Dies Cannot Produce
Complex cross section aluminium profiles from Xiamen Xihong Aluminum Industry Co., Ltd. carry multi-rib, multi-cavity, cantilever and sloped-wall shapes, measured about 24 × 9 mm to 193 × 28 mm, wall thickness 0.6–25 mm. Ribs and teeth can be drawn as thin as 0.6 mm. Several functions are formed in one extrusion pass, so a part that would otherwise be welded from pieces arrives as a single profile.
What Can Be Built Into the Section
Reinforcing ribs, guide slots, snap grooves and heat-dissipation teeth can all sit in the same section. That cuts part count and weld operations, improves structural continuity, and removes joints that could fail. Geometry can be tuned for strength against weight, and forming stays stable across batches so repeat orders match the first.


Strength by Alloy
6063-T5/T6 and 6005-T5/T6 are standard, with 6061-T6 and 6082-T6 on request. 6063-T6 gives Rm ≥ 195 MPa and Rp0.2 ≥ 160 MPa; 6005-T5 reaches Rm ≥ 250 MPa and Rp0.2 ≥ 220 MPa. Tolerances follow GB/T 5237.1-2017 high-precision or ultra-high precision grade; lengths up to 6 m are cut to order.
Applications
Automotive component structures, electronic equipment housings, mechanical structural beams, complex guide channels, machine frame parts, new energy battery pack structures and PV mounting profiles.
Extrudability Review Before Tooling
Intricate sections are established work. The factory studies the drawing for extrudability and proposes structural and alloy improvements before the die is cut. Incoming, first-off, in-process and final inspection are recorded for traceability; certificates and test reports are provided and third-party inspection is accepted. Export-grade packing can be adapted; EXW and FOB are offered. Domestic custom delivery begins at 15–20 days.
Hot Tags: complex cross section aluminium profiles, China complex cross section aluminium profiles manufacturers, suppliers, factory, Bespoke Aluminium Extrusion Profiles, Bespoke Aluminium Profiles, Complex Cross Section Aluminium Profiles, Multi Cavity Aluminium Extrusion Profiles, Multi Slot Aluminium Extrusion Profiles, Special Section Aluminium Profiles